Choosing the right broadhead is partly a matter of preference, but it’s also a matter of performance. Depending on your situation, different broadheads will perform differently, and there are so many varities out there that it can be hard to know which ones will be the best choice for you.
Well, today we’re going to make that choice a little easier in our Grim Reaper Broadheads reviews. We’ve hand picked the best of the best Grim Reaper broadheads, and we’ve done a short write up for each one to help you make your choice!
Grim Reaper’s excellent broadheads offer enhanced penetration, bigger blood trails, and a serious advantage to bow hunters. Let’s take a look at what they have to offer!
Grim Reaper Carni Four Reviews
If you value precision above everything else, the Grim Reaper Carni Four Broadheads will deliver just that. The accuracy on these broadheads is unlike any other and therefore the wound channels are impressive and extremely effective when taking down your target.
These tips are razor sharp for quick and easy penetration, and the motorized cam unlocks the sides easily on impact. Not to mention the fact that their stainless-steel construction makes them durable and practically immune to corrosion.
The mechanical blades are large, and dependable, causing large wounds at the point of entry. Plus, the design of this broadhead makes it as comfortable to use as your practice heads are, and a unique angled design increases aerodynamics and accuracy of long range shots for your bow hunting pleasure.
These babies are also efficient. They only engage within range of cutting the organs and only after the broadhead has penetrated the skin, allowing the blades to remain sharp over time and increase their life. Check these out here.
- Approved for any crossbow or compound set-up
- 1 1/2 x 1 1/4 Cut Diameter
- New PRO TIP and “Snap Cup” design
- 100 Grain
- The largest 4 blade entrance hole
- Retain sharpness longer
- Stainless steel blades
- Extreme accuracy
- Very efficient
- Easy to use
- Requires more strength to use
- Only available in the 100-grain weight version
Grim Reaper Hybrid Broadheads Reviews
From our extensive research, we’ve found this to be one of the most efficient broadheads on the market. You’ll be able to use this broadhead with virtually any bow. The Grim Hybrid Broadhead is also a fantastic investment for the average bowman, because it allows you to sharpen the blades repeatedly after each use to prolong their life.
These broadheads are also constructed of high-quality and durable steel, which is incredibly hard and sharp. They’re diamond cut, and one of these will produce devastating damage to your target, causing quick and humane kills that won’t have you chasing your prey for miles and ruining the meat.
This model comes with far better features than its previous version, which is why it’s so highly regarded by so many hunters. It’s sharper and flies better than the older model, but, some hunters are displeased with the fact that it doesn’t come in enough grain weights.
While some might argue that broadheads with four blades don’t travel as far as two-blade models, that’s not the case for the Grim Reaper hybrid. It’s unique design allows the arrows to travel as far as two-blade broadheads, but, at the same time, you may prefer the devastating power that only four-blade broadhead models can provide.
However, you will get excellent cutting power, thanks to the V-notch chisel tip that the manufacturer takes great pride in. If you’re searching for accuracy and killing efficiency, this model is a must try. More reviews and prices here.
- High-quality steel construction
- 2 fixed blades and 2 mechanical blades
- V-notch chisel tip
- World-class mechanical razors
- 100 Grain
- Razor-sharp blades made of stainless steel
- Excellent cutting power
- Exceptional accuracy
- Deep penetration and wound channels
- Easy to use
- long-lasting performance
- Not a beginner model broadhead
- Not as precise as field points if you’re accustom to those
Grim Reaper Whitetail Special Review
From our tests and surveys, the Whitetail has repeatedly come out as a top pick for the discerning bow hunter. These well made broadheads feature a chisel tips, which helps to create deeper wounds upon impact, making them a favorite for whitetail hunters.
The chrome steel blades are sharp enough to penetrate deep into the tissue, causing faster blood loss. Once the mechanical blades are deployed, it causes a 3D hole, which causes severe bleeding, leading to less chase and a quicker death for the prey.
As their name implies, these broadheads make short work of deer. However, it’s important to realize that you need the right size broadhead for your bow as well. If you don’t have the right amount of kinetic energy backing the broadhead, then penetration will be poor.
The larger the cut diameter, the force you’ll need behind that broadhead to get good penetration. You’ll need to figure out how much kinetic energy your setup is capable of generating based on your own hunting setup before choosing a broadhead.
This broadhead is excellent for whitetail size or smaller game, assuming the rest of your setup is up to snuff. However, they will likely perform poorly for larger game though, so look for something a little more robust for your bigger targets like Elk, else you may lose your prey due to an unsatisfactory wound for their size. These broadheads are razor sharp, fly true, and they’re made of very durable stainless steel and do their job as long as you do your research beforehand.
- Durable stainless steel
- Deep wound channels on whitetails and medium sized prey
- Razor sharp
- Sleek design
- Creates deeper cuts
- Creates 3D like holes for increased blood flow
- Long lasting sharpness
- Unsuitable for larger animals
Grim Reaper Hades Review
If you’re in the market for an excellent fixed blade broadhead rather than a mechanical one, then the Grim Reaper Hades won’t do you wrong. It’s a 3 blade broadhead that will hit with tremendous force assuming you have a sufficient bow.
They’re made of aircraft grade aluminum and feature rust-proof tips to prolong their life. The arrows are perfectly balanced, and their performance will likely be very similar to the practice tips that you’re used to on your shooting range.
The tips are sharpened on both ends as well. This allows for cutting to occur both on entrance and exit if the arrow goes straight through. However, these bad boys are even strong enough to break bones, with some hunters claiming to shatter a deer’s ribs on impact and exit.
However, these fixed blades are not just for deer. This particular broadhead is also deadly effective against far bigger game animals, and it’s like the best grim reaper broadheads for elk, larger African game, and even bears. While mechanical broadheads may be fancier, the fixed blades excel in this department, and if raw power for big game is your aim, then the Hades should be your top pick all the way.
Sometimes simple is just better, though we would prefer a more robust steel construction as a personal preference, and blood trails may be limited if your shooting is not dead on, so keep that in mind when using them.
- Corrosion Resistant, Rust-Proof tip
- Sharpened on Blade backside for maximum internal cut
- Extremely Sharp High Strength Blades
- Aircraft Grade Aluminum
- Preferred fixed blade for larger game animals
- Preferred broadhead by big game hunters
- Sharpened on both sides for maximum internal damage
- Corrosion Resistant
- Rust-Proof tip
- Stays sharp long-term
- Lots of grain weights available
- Aluminum construction rather than steel
- Requires more skill to shoot than some other broadheads
Grim Reaper Fatal Steel Broadhead Review
The Fatal Steel’s best features is its hybrid design. Not only are these broadheads as easy to shoot as your field tips, but they’re deadly accurate, with most hunters claiming their kill only makes it 40 or 50 yards before dropping.
Their solid steel construction makes them super durable, and even bone won’t stop these broadheads from hitting their mark. The tips provide smooth and straightforward penetration, and the multi-blade design makes for a deadly shot!
While this particularly broadhead is a little newer in the Grim Reaper line, it’s fast becoming a favorite of many hunters. However, some hunters are dissappointed by the fact that this broadhead tens to not make large entrance holes.
This doesn’t mean that the broadhead is bad mind you, and the deer still drop. It just performs differently than you might expect, so be prepared for that and make sure to line up a good shot, because blood trails may be sparse depending on circumstances. Check prices and see the full list of specs here.
- Internal spring mechanical system
- Solid steel design with the v-notched tip
- 1 1/4″ cutting diameter
- Stainless steel blades
- Razor sharp hybrid model
- Very durable steel construction
- Quick kills
- Excellent precision and accuracy
- The cutting diameter is relatively small
- Very limited grain weights
How to choose the best broadhead for your bow and hunting style
It’s easy to cite specs and personal anecdotes about broadheads, but the truth is, any broadhead will preform poorly in the wrong setup. Make sure that you follow these tips and choose the right broadhead for your situation!
The larger the cutting diameter of the broadhead, the more force that will be required for proper penetration. If you are shooting a broadhead that is not properly matched to your setup, then you’ll not be having a great time on your hunt.
Many inexperienced hunters wrongly blame the broadheads, when it is in fact the rest of their hunting setup that is to blame. Make sure everything plays nice together before you invest a small fortune in gear that doesn’t match.
Before deciding on a broadhead model, make sure that it’s the appropriate grain weight for your bow. Choosing the wrong weight is often disastrous for accuracy, and you’ll be putting yourself at a serious disadvantage when it comes to accuracy.
Number of Blades
A greater number of blades provides a greater cutting surface, but it also means that you need more power behind those blades! If you’re shooting low poundage, then go with a 2 blade model, as you’ll need a heftier setup for the 3 and 4 blade models.
It is important to make sure that the inserts you have got in your arrows fit. A number of the ultra-thin arrows on the market require special inserts that may boost the price and complexity of your setup.